Expert metal roof coating in Atlanta, TX. Licensed spray foam contractors with manufacturer-backed warranties and free inspections.
Our metal roof coating process in Atlanta starts with surface preparation — rust treatment, fastener tightening, and seam repair — then applies a bridging fabric at critical joints followed by a full elastomeric topcoat. The result is a sealed, reflective roof that looks and performs like new.
When Atlanta, TX property owners need metal roof coating, they turn to Lapolla Industries for the same reason thousands of customers nationwide do: we solve the root problem, not just the symptom. Our diagnostic approach uses infrared scanning, moisture mapping, and visual inspection to ensure the solution we recommend is the one your building actually needs.
With over two decades of spray foam experience, our Atlanta crews have seen every metal roof coating scenario Texas weather can create. We use that experience to select the right foam type, coating system, and application method for your specific property — delivering metal roof coating results that hold up to Atlanta conditions year after year.
From inspection to completion, here is how we deliver professional metal roof coating results.
Every project begins with a thorough inspection of your property. We evaluate the existing condition, identify problem areas, and use infrared moisture scanning when needed to reveal hidden issues. You receive a detailed report with photos and honest recommendations.
Our preparation process includes substrate inspection, cleaning, moisture testing, and priming. We mask all areas not receiving foam, set up containment where needed, and verify that temperature and humidity conditions are within specification for application.
Using precision spray equipment, our crews apply the foam in controlled passes to achieve the specified thickness and density. The closed-cell foam expands 30 to 40 times its liquid volume, conforming to every detail of the surface and creating a seamless monolithic barrier.
After the foam cures, we apply a UV-protective coating — silicone, acrylic, or elastomeric — selected for your specific application and climate. We then remove all masking, clean up the work area, and conduct a final walkthrough with you to verify satisfaction.
What Atlanta property owners ask most about metal roof coating.
Costs for metal roof coating in Atlanta vary based on project size, existing conditions, and material requirements. We provide free on-site estimates with detailed written proposals. Contact us at {phone} for a no-obligation quote.
Absolutely. Once cured, spray polyurethane foam is inert and non-toxic. Our Atlanta crews follow all OSHA safety protocols during application, including full PPE and ventilation procedures. The foam cures within minutes and is safe immediately after.
Yes. Every Lapolla Industries crew working in Atlanta is fully licensed, bonded, and insured for spray foam application. We carry general liability and workers compensation coverage on every project and can provide proof of insurance upon request.
Most residential metal roof coating projects in Atlanta are completed within 1 to 3 days. Larger commercial projects may take longer depending on square footage and complexity. We provide a detailed timeline with every estimate.
Our reputation is built on results. Here is what our customers have to say.
"Full roof replacement on our 12,000 square foot commercial building. Lapolla Industries removed the old single-ply membrane and installed spray foam with a silicone topcoat. Clean work, professional crew, and a 20-year warranty."
"Our corrugated metal roof was rusting at every fastener and seam. They cleaned the entire surface, treated the rust, and applied a thick elastomeric coating. The roof looks brand new and is completely sealed now."
"They sprayed closed-cell foam in our attic and the difference was immediate. Our upstairs bedrooms are finally comfortable year-round and our heating bill dropped by about thirty percent. The crew was in and out in one day."